Resinas DLP
Resina específicamente formulada para trabajar con impresoras de proyección DLP de 405nm como; Sprintray Pro Moonray D, Moonray S, Asiga Max UV, Strutco, Miicraft y otras impresoras similares.
Mostrando los 7 resultados
-
¡Oferta!
ApplyLabWork Resina DLPUV385 Gray para Asiga Max UV385
79,95€ -
ApplyLabWork Resina DLPUV385 TAN para Asiga Max UV385
89,95€ -
ApplyLabWork Resina DLP TAN V2 para impresoras SprintRay
84,95€ -
ApplyLabWork Resina DLP Modeling Clear
89,95€ -
ApplyLabWork Resina DLP Modeling White
84,95€ -
ApplyLabWork Resina DLP TAN V3 para impresoras SprintRay
84,95€ -
¡Oferta!
ApplyLabWork Resina DLP Modeling Gray V2
79,95€
 MODELING |  MODELING | MODELING | MODELING |  MODELING |  MODELING | MODELING | MODELING | |
Group | Design Concept | Design Concept | Design Concept | Design Concept | Design Concept | Design Concept | Design Concept | Design Concept |
Tensile (MPa) | 65 - 75 | 65 - 73 | 53 - 58 | 52 - 59 | 62 - 70 | 50 - 58 | 42 - 46 | 40 - 46 |
Elongation (%) | 2 - 4 | 2 - 3 | 1 - 2 | 1 - 2 | 1 - 5 | 2 - 3 | 2 - 4 | 1 - 3 |
Impact (J/m) | 20 - 25 | 20 - 25 | 17 - 25 | 23 - 28 | 28 - 30 | 21 - 25 | 19 - 26 | 20 - 24 |
Hardness (Shore) | 85 - 87D | 85 - 87D | 85 - 87D | 88 - 90D | 86 - 88D | 87 - 89D | 85 - 87D | 85 - 87D |
Flexure Strength (MPa) | 103 - 118 | 115 - 120 | 105 - 115 | 105 - 118 | 82 - 90 | 100 - 105 | 75 - 77 | 76 - 80 |
Flexure Modulus (MPa) | 2100 - 2500 | 2200 - 2450 | 1900 - 2100 | 1950 - 2100 | 1700 - 2000 | 1770 - 1930 | 1400 - 1450 | 1400 - 1450 |
HDT (ºF/ºC) | 152.42/66.9 | 148.82/64.9 | - | - | 130.82/54.9 | 143.06/61.7 | 140.36/60.2 | 137.84/58.8 |
Viscosity (cP) | - | - | 390-450 | 380-410 | 340-380 | 300-360 | 33-390 | 300-370 |