Resinas MSLA
Resina formulada para impresoras SLA de 405Nm (LCD/LED) como son las impresoras; Anycubic Photon, Photon S, Phrozen Shuffle, Shuffle XL, Phrozen Sonic, Phrozen Mini 4K, Wan Hao D7 y otras impresoras similares.
.
 MODELING |  MODELING |  MODELING |  CYAN | HEAT | HEAT | |
Group | Design Concept | Design Concept | Design Concept | Speciality | Prototype Engineering | Prototype Engineering |
Post-curing | - | - | - | - | FormCure at 35ºC/60min | FormCure at 60ºC/60min + oven 160ºC/90min |
Tensil (MPa) | 52 - 60 | 47 - 55 | 53 - 67 | 6 - 7 | 55 - 75 | 60 - 80 |
Elongation (%) | 2 - 4 | 1 - 4 | 1 - 3 | 7 - 9 | 1 - 2 | 1 - 3 |
Impact (J/m) | 20 - 28 | 18 - 26 | 29 - 31 | - | 19 - 25 | 24 - 31 |
Hardness (Shore) | 89 - 92D | 86 - 90D | 85 - 88D | - | 85 - 87D | 87 - 89D |
Flexure Strength (MPa) | 92 - 100 | 92 - 96 | 95 - 105 | 100 - 105 | 130 - 145 | 135 - 185 |
Flexure Modulus (MPa) | 2100 - 2300 | 2100 - 2300 | 1800 - 2000 | 90 - 120 | 2550 - 2650 | 2850 - 3000 |
HDT (ºF/ºC) | 140.36/60.2 | 137.84/58.8 | 149.54/65.3 | - | 228.2/109 | 482/250 |
Viscosity (cP) a 77ºF/25ºC | 310-380 | 300-370 | 360-450 | 300-350 | 450-550 | 450-550 |